Showing posts with label recording. Show all posts
Showing posts with label recording. Show all posts

7/13/2012

CAD Professional Mics E100S Supercardioid Large Diaphragm Condenser Microphone Review

CAD Professional Mics E100S Supercardioid Large Diaphragm Condenser Microphone
Average Reviews:

(More customer reviews)
I have a modest home studio, and my recordings have received kind comments from listeners and fellow engineers alike. Though I am on a budget like almost everyone else, I take my equipment seriously, and believe that one is better off saving for what will deliver widely-recognized quality, rather than trying to economize by buying the minimum you need to get a recording done. When you buy too cheap, you often end up spending 3x what you would have spent (for the good stuff) in money lost through trade-ups--because you just can't get happy.
My personal philosophy out of the way, I have respectable gear that can help me tell the difference between a decent mic and a wannabe.
I tested the e100s through a Metric HALO ULN-2 extended, Logic Pro-9, ADAM A-7 Monitors, and various reference quality headphones, including the AKG K-701 and Ultrasone PRO 750s.
I used the mic by itself, X/Y with a Peluso CEMC-6 SMC, and in an M/S configuration with a RODE K-2 Tube mic. I recorded both vocals and acoustic guitar (this last being my personal favorite for showing up crappy wannabe equipment. Transients, fundamentals, and harmonics from a quality guitar are a great test for mics, pre-amps and monitors, and I have two guitars I tried: a Martin D-35, and a Larrivée LV-05e).
The e100s didn't disappoint. It delivered nicely textured, transparent sound, and as a bonus (especially for those of us who want to make clean, quiet, acoustic recordings), it wasuncannily, blissfully, quiet. I mean quiet. Did I say quiet?
My ULN-2 has something like a 125dB S/N Ratio, and this mic made it worth the investment. Holy-moly. I've used Neumann, RODE, Peluso, MXL, etc., etc... this mike is the quietest of them all...even quieter than the TLM-103.
Great sound. Dead quiet. Buy it.

Click Here to see more reviews about: CAD Professional Mics E100S Supercardioid Large Diaphragm Condenser Microphone

Engineered and built in the USA, the new E100S large diaphragm supercardioid condenser has the lowest noise floor in its class (3.7 dBA) and the smooth vintage tone and robust low end CAD is known for. The bootstrapped, full differential Quadra-FET front end delivers high sensitivity and low distortion, plus CAD's proprietary circuitry ensures the highest performance. The nickel plated 1" capsule delivers accurate phasing on instruments, and a full rich vocal tone, accentuated by the extended low frequency response. Features include an 80Hz hi-pass filter and a 10dB pad. From vocals to percussion, acoustic instruments and everything in between, the CAD Equitek E100S will prove to be one of the most versatile tools in your microphone locker, in the studio or on stage. Vintage woodgrain cherry case and stealth shock mount included. 48V phantom power is required. ApplicationsStudio Vocals Choir Acoustic Instrument Guitar Cabinets Bass Cabinets Strings Piano Cymbals/OverheadsSpecificationsOperating Principle: Condenser Polar Pattern: Supercardioid Frequency Response:

Buy NowGet 25% OFF

Click here for more information about CAD Professional Mics E100S Supercardioid Large Diaphragm Condenser Microphone

Read More...

7/11/2012

Tascam FIREONE Firewire Audio Interface Review

Tascam FIREONE Firewire Audio Interface
Average Reviews:

(More customer reviews)
I recently upgraded to a MacBookPro with Logic 7 on it. I needed a control surface that was Firewire based and would allow good functionality and portability. This audio interface/control surface provides a nice touch. I went from an Ozone Midi controller to this because this one was Firewire-based AND I never was into using the keyboard. For my purposes, plugging a mic, guitar, bass and electronic drums this was a great option. It took a little bit of fiddling to work with a MacBookPro (with Tiger and Leopard) and involved a rollback of Firewire drivers/firmware which is available on the Tascam website.
Without the rollback, the control surface will not work (or will work unpredictably). This is a Mac/Logic 7 issue. Anyway, I'm pleased. It looks great, works great (after Fix for Mac OS X 10.4.10 FireWire) and seems very durable.
Time will tell.

Click Here to see more reviews about: Tascam FIREONE Firewire Audio Interface

2-Channel FireWire Audio Interface. Large weighted backlit Jog Wheel. Programmable Function Keys. MIDI I/O. Includes recording software

Buy NowGet 38% OFF

Click here for more information about Tascam FIREONE Firewire Audio Interface

Read More...

7/10/2012

Tascam DP01FX 8 Track with Effects Digital Multitrack Recorder Review

Tascam DP01FX 8 Track with Effects Digital Multitrack Recorder
Average Reviews:

(More customer reviews)
My first multitrack recorder was a Fostex cassette based recorder back in the early 90's. I loved it - used it nearly daily to work out arrangements or learn new songs. When it finally quit working, I was a little heartbroken.
At that time, someone had turned me on to PC multitracking software - which was a suitable solution, until I started upgrading. I found that certain programs wouldn't work with certain operating systems, conflicts with various attached devices would cause recording errors. I felt like I spent more time troubleshooting my system than actually recording.
After much research, I settled on this unit. As a solo artist this is an excellent machine - I mostly record acoustic arrangements, with some electric guitar and drums. Although I've used this for a week, I couldn't be happier with the results...far superior to my old cassette unit, and much easier to use than software. The sound is much better than I hoped for...and the menus are easy to navigate.
The guitar effects are OK, but not great. I don't expect I'd use them at all...the sound I get when I mic my amp is far better. The vocal and drum effects, on the other hand are more useful. Overall, I expect I should be able to make very high quality demos.
You can only record two tracks at a time, but as a solo artist, that's not such a big deal. For bigger arrangements, such as with my band, I have a 14 channel Mackie mixer that I run into the unit that allows me greater flexibility.
The unit is easy to learn how to use, and the user's guide is written so that my 11 year old can figure it out. I had no trouble recording, mixing and mastering...following the instructions in the guide, I was able to successfully transfer the final mixdown of my music to the computer without any hangups.
Overall, I'm very satisfied with this unit.


Click Here to see more reviews about: Tascam DP01FX 8 Track with Effects Digital Multitrack Recorder

Twenty-five years after the introduction of the first Portastudio, the new DP-01FX 8-track Digital Portastudio makes hard disk recording affordable and simple enough for all musicians. Continuing TASCAM's "Capture Your Art" campaign of making recording approachable to all musicians, the DP-01FX features the one-knob-per-function design that has made TASCAM cassette Portastudios the choice of thousands of musicians. It shatters the confusing page-shift-menu interface popular with most other digital recorders. And at a price under $500, multitrack recording to hard disk has never been more affordable.The DP-01FX has two mic inputs on 1/4" TRS or XLR jacks for dual mono or stereo recording. Phantom power is provided for connecting professional condenser microphones. Its eight tracks record at uncompressed CD quality to an internal 40GB hard drive, and a stereo master track is available for recording a mix. Each channel has a 45mm volume fader, plus dedicated controls for pan, effects send, high EQ and low EQ. An LCD display shows meters, editing settings and locate points. The DP-01FX has a USB 2.0 jack for file backup and transferring mixes to a computer. There are analog RCA line outputs, a headphone out and S/PDIF line output. The DP-01FX also has a multieffects processor for adding effects to an instrument during recording and a reverb processor for adding effects during a mix. 8-track recording at uncompressed CD quality into a built-in 40GB hard drive2-tra...

Buy Now

Click here for more information about Tascam DP01FX 8 Track with Effects Digital Multitrack Recorder

Read More...

7/09/2012

Korg R3 37-key Synthesizer and Vocoder Keyboard Review

Korg R3 37-key Synthesizer and Vocoder Keyboard
Average Reviews:

(More customer reviews)

This is a professional keyboard, so if you want some great sounds at an affordable price, this could be perfect for you.
Very transportable; incredible sounds; knobs that allow for adjusting sounds; multi-effects processor; vocoder.
I could go on and on. This keyboard comes in very handy, and I've used it for rock, contemporary, R&B, worship, etc.
You'll be impressed by the sound of this keyboard. It's small, but packs a huge punch.

Click Here to see more reviews about: Korg R3 37-key Synthesizer and Vocoder Keyboard

The R3 is a full-fledged synthesizer that provides an easy and affordable way to enjoy sophisticated synthesis and advanced sound creation. In a compact and light-weight body, it packs 37 full-size, velocity sensing keys, along with two-timbre/eight-voice performance power. The sound generator section uses the same acclaimed MMT (Multiple Modeling Technology) used by the KORG RADIAS, delivering thick, gutsy, and crisp analog sounds. With quality that will satisfy both professionals and beginners, the R3 is a great choice for adding synth sounds on stage or in music production.

Buy NowGet 25% OFF

Click here for more information about Korg R3 37-key Synthesizer and Vocoder Keyboard

Read More...

7/08/2012

Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface Review

Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface
Average Reviews:

(More customer reviews)
This thing is awesome.
But let's start with the bad, before we get to the good. The Bad:
- The preamp quality is not that great. I want to be careful not to over-state this too much: they are certainly not BAD preamps, and they are certainly competitive with other preamps that can be bought eight at a whack for $300, but they are not fast-response, high-headroom, ultra-clean studio preamps. They are more like the preamps on a decent portastudio (duh). They have a bit of a tendency to flab out on DI bass tracks, and can turn a bit crunchy/hashy at the top with difficult program material such as cymbals or detailed condensers. Backing off the input gain and recording at lower levels helps but does not completely solve these issues. And ribbon mics are pretty much right out: there's just not enough clean gain to drive low-output mics while preserving sound quality. But they are perfectly adequate for midrangey, high-output dynamic live mics, such as Shure SM57s and 58s, and considering the price point and what you're buying, they are actually quite capable: VASTLY better than the 1/8" mic/line input on a typical consumer soundcard, and comparable with a typical budget/prosumer mixer or live console.
- Phantom power on only two channels. I imagine this is a limitation of using USB/battery power, and it's frankly kind of amazing that they can deliver 48V at all. But it is still a limitation. If you want to use this box for full-blown studio recording, for this reason and the above, you'll probably want to have some outboard preamps or a mixing console or some such (soundcraft makes some inexpensive mixers with pretty good preamps).
- Zero midi anything. I'm not sure if this is a "bad", so much as just something to be aware of. Inclusion of a simple GM synth or drum machine, or even the ability to record MIDI would have expanded the usefulness of this box, but also would have added a lot of complexity to the little menu-based LCD interface. Overall I think it was a better decision to leave it out, and keep the device easier to use, but it's worth being aware of: if you want to record midi instruments with this box, you will be recording the output as audio.
- Usability/latency problems as a computer audio interface. I found this box to be unsatisfying as a laptop audio interface using early 2010 drivers. USB audio interfaces can be iffy compared with firewire or PCI, and this was no exception. I experienced intermittent problems with crackly audio, dropouts and skips, and had to frequently adjust latency settings and/or restart the hardware. Such problems were intermittent, but even occasional meltdowns can make such a device almost unusable. It's easier to simply record standalone to the Zoom R16 and then dump the files into computer via USB for editing and mixing in your favorite DAW software. Bear in mind that every computer is a bit different, so YMMV, and future firmware or driver updates may help the situation. But for now I cannot recommend it as a primary multitrack audio interface for computer-based recording (although I certainly recommend it as a portable multitrack recorder that can integrate with a computer setup).
So much for the bad. The good:
- IT RUNS ON FRIGGEN BATTERIES. If you are new to recoding, it may not be clear what a revolutionary thing this is, to have a complete recording that you can leave on the coffee table or stick in a backpack and take a full project from recording, through mixing, with effects, and run the whole thing on six AA batteries. Battery-powered recorders are obviously not new, but this box is genuinely a full-capable recording studio that achieve the magic 8 simultaneous inputs, with effects and mixing. And battery life is actually quite good. The more tracks and more processing and effects you're using, the faster they deplete, but even at full load you're changing batteries maybe every two hours, more than enough time to re-charge a spare set of rechargeables.
- SD storage. Using SD cards as the storage medium means cheap and easy storage, but even better, no fans, no motors, no whirring/clicking hard disk... this box is *silent*. It also means that it records like tape: there is no saving, no file-management... just hit record or play, turn power on and off whenever you want-- no worries, and no inspiration-killing hassle.
- Ease of use is really good. Text- and menu-based LCD windows can be a nightmare to deal with, as anyone who was recording in the early days of digital knows. But if you're familiar with multi-track recording generally, this device is easy to use right out of the box. Reading the (pretty good) manual is not required to start recording and mixing, but it does reveal a LOT of deep functionality. If you are new to recording, this is a pretty easy way to get started: it doesn't have the graphical point-and-click simplicity of a computer-based interface, but it also skips over all the issues of latencies, drivers, file-management, and various computer-related headaches. The R16's true 8-input recording and 16-track playback allow it to skip/simplify internal routing, bussing, etc, making it very straightforward to use: every physical channel is a track, and there is a bank up/down key to determine whether you're working with tracks 1-8, or 9-16. Couldn't be simpler. Each channel has a play/mute/record toggle button with a color-changing LED to tell you what state it's in, and the transport controls work just like a tape machine. The menus for effects, project selection, track swapping, etc are all straightforward and well-thought-out, with clearly-labelled buttons for each menu. Connections are extremely simple and obvious. Each channel has a gain/trim control and a mix fader with a 4-LED meter that automatically switches from record level to playback level depending on the track status, and channels with switchable input status use separate physical switches to flip between phantom power on/off, built-in vs external mics, or instrument/mic inputs. Easy peasy, with no obscure or hidden settings or parameters to drive you nuts.
- The built-in mics are an outstanding feature. They are your basic electret omni mics, which means they are quiet, accurate, and have good dynamic response with both low- and high-volume material. Just flip the switch and set them to record and you can track all your rehearsals, live shows, living-room practice, whatever. You can make full multitrack demos using just this box and a pair of headphones.
- Built-in effects are comprehensive, quite good, and very well-thought out. The presets are very usefully-constructed for a box of this type, designed to minimize menu-based tweaking. The main "default" effects configuration is set up for semi-automatic per-channel eq/compression, a master reverb/delay with per-track send, and a full suite of guitar and bass effects on the hi-Z "guitar channel". Digging into the menus further allows you to assign any effect to any track, to change whether insert effects are "hard-coded" onto the incoming audio, or just applied as a bus effect (for example, if you wanted to hear the effect during tracking and playback, but keep the underlying audio "clean" for later processing in a computer DAW or whatever). There are also a host of nifty extras including preamp modellers, guitar and bass amp emulators, wah/modulation/etc "special effects", acoustic guitar and bass simulators, and so on. Not 10 years ago, this box would have been worth the price as a single-channel multi-effects processor alone. Some of the settings are a little weird, and I'd much rather do a full mixdown using hardware processors or computer plugins than using menu-based text inputs, but the effects are all real-time, and you can hear your changes as you make them, so it's certainly possible to do a full record with this box alone, and effects quality is comparable to other digital hardware processors.
- Overall sound quality is quite good. Even factoring in the preamp reservations above, 15 years ago you could have spent 10 or 15 thousand dollars EASILY and still not had the sound quality and capability of this little box (plus you would have needed 20 electrical outlets and a room to store it all in, not to mention hundreds or thousands of dollars worth of racks and cables). It probably won't replace your RME interface or Apogee converters, and it certainly won't replace a collection of API and Telefunken mic preamps, and you'll probably want to hang onto to your UAD card if you have one, but good luck sticking all that in a laptop bag and taking it to the beach.
This plus something like a Tivoli Audio iSongBook (or even a pair of headphones) makes a complete, battery-powered multitrack studio that fits in a backpack or laptop bag, with room left over to hold spare batteries plus a couple of mic cables and SM57s, if you want them. Laptop-based mobile DAWs have always seemed like an awesome idea, but in practice things like boot times, dongles, limited mobile interface options, mixing and control via mousepad, short battery life, self-noise, computer-related reliability and stability issues, etc have always tended to keep it a good "idea" as opposed to a truly mobile "on your lap" studio. This is perfect and easy to take on the road, record in the tour bus, in the rehearsal space, in the hotel room, at a picnic table, a house party, wherever.

Click Here to see more reviews about: Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface

Zoom has revolutionized digital recording again with the first digital recorder with 16-track playback and 8-track simultaneous recording that utilizes Secure Digital (SD) memory. The new R16 recorder is three production tools in one incredibly versatile device. It's a digital multi-track recorder, an audio interface and a control surface, providing you with all the tools necessary to create studio-quality recordings anywhere.

Buy NowGet 43% OFF

Click here for more information about Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface

Read More...

7/07/2012

Lexicon IONIX U42S 4-Input USB 2.0 Desktop Recording Studio Review

Lexicon IONIX U42S 4-Input USB 2.0 Desktop Recording Studio
Average Reviews:

(More customer reviews)
This device is solidly built, compact, and has great styling. Oh, and fantastic audio.
September 20, 2009 update: Better hope you don't have to deal with Lexicon's tech support. It is absolutely the worst ever anywhere. If you read through the comments to this review, another customer had extreme difficulties finding 64bit drivers. They weren't on the shipping CD, unlike my CD which did have the drivers. It took him weeks before anyone would respond to him. Ultimately, he bought another brand. The new 64 drivers were released a few weeks ago. I tried to install them on my computer and came up with total zero - the device no longer worked since the driver install failed. I emailed tech support, 2 weeks later I got a did you disable your virus software? Then I responded immediately, they are fools, of course that wasn't the problem. Then a week later I got another email that said and engineer identified the error code I sent (in the original email, but repeated for effect a second time)as the USB connection not working properly, and was the blue USB light on. Oh and by the way, please send them the information from the System Device control panel for the type of computer I have. I finally discovered that there was a problem with Windows 64 bit installers after Vista's SP2 update that makes it not work very well sometimes. I did this registration thing with a file. Reverted my computer to the old driver and then the software actually installed correctly - and I'm back in business. Sadly, absolutey no help from Lexicon.
If it were possible to change the star rating, or split the rating - Device / Hardware 5 stars; software not so great 3 stars; tech support for a Professional Product - absolute -100000000 stars totally blows chunks worse than most software companies I've dealt with.
Back to the Original Review:
Some physical description, this is a 4 input mixing, analog to digital, sound console. It uses USB-2 to connect to a computer, however a computer is not a necessity to use this as a mixer. The software included Cubase LE4, Pantheon II Reverb plug in, and Toontrack EZDrummer Lite (along with the required drivers and owner's manuals).
The inputs - 4 rear XLR / 1/4" combo plugs (allows either type of plug in); Midi IN; SPDIF - Coaxial - IN. There are two Instrument 1/4" jacks on the right hand side of the console.
The outputs - 2 1/4" headphone jacks on the left side. Two line level 1/4" jack audio outputs, Midi Out, and SPDIF - Coaxial -Out; and USB out.
There are also two buttons on the back for +48V phantom power.
The controls on the front, 2 headphone controls, the 4 input controls (inputs 1 and 2 can be made stereo pairs; as can 3 and 4). A large output level control. And a control to blend the amount of raw direct input sound, versus the amount of post processed sound.
Each volume control has a set of LED's above them to adjust levels.
The mass of this controller is just perfect, it weighs enough so that the thing will not slide around while plugging and unplugging inputs. The style is a bit like Harmon Kardon - black over silver. The control knobs just scream high quality. The whole thing is powered by a well designed A/C adapter with cords on both ends.
Computer installation. Plug the USB connector in. Insert the included software disc, select install drivers, and find out that only the 32 bit drivers are included. So it's off the Lexicon website to get the 64 bit drivers, my system is 64 bit Vista. After a ton of windows and separate installs, a reboot was necessary and all was happy with the connection.
Then came the pain and suffering:
Cubase was a major pain in the rear end to install. There must be 50 steps to finally get this program validated, registered, and authorized. It's frankly critical to open the installation instructions and follow them to the letter. Nothing but nothing is simple about this install, and it's just to complex to repeat here.
Once up and running - wow this thing is a total joy to use. I'm very new to recording (this is my first recording console). We plugged in an electric acoustic Laguna guitar, followed the instructions for getting started with Cubase, adjusted the volume on the console (the LED's on teh console helped get the levels right), hit record in Cubase; and voila a really great clear recording saved as a WAV file. Couldn't have been easier and higher quality.
The bit of surprise was playback. No matter what I tried, I could not get my Logitech Z-10 speakers to output a recorded track directly from Cubase. This is all probably by design, and it's just my inexperience. I had to use the left hand headphone jack to listen to the sound. This also worked as a monitor when we hooked up an electric guitar. The output quality on those headphone outputs was incredible. The only way I could playback the recorded track, once you press stop at the end of recording, the WAV file is written to the hard drive. That wave file can then be simply played through windows media player or any other player like a standard WAV file.
We did a few recordings and then burned the WAV files to CD. Played on a very nice stereo system, the clarity was absolutely amazing. Bass was solid, the highs were crystal clear. I loved those first recordings.
I've paired this with a Shure SM58 microphone for voice recording.
It feels like I have purchased a really fine solid piece of audio hardware. The sound recorded so far is nothing short of remarkable. For a pure beginner, I was able to get this set up and working surprisingly quickly and do a very decent recording. The Cubase learning curve is going to be huge, I can see that. But simple first out of the box, what a great experience.

Click Here to see more reviews about: Lexicon IONIX U42S 4-Input USB 2.0 Desktop Recording Studio

The I'ONIX U42S USB 2.0 Desktop Recording Studio offers the highest quality hardware and software to provide the user with exceptional recordings. All the necessary tools are provided to transform your PC or Mac into a professional 24-bit/96kHz digital recording studio including the U42S recording interface, Steinberg Cubase LE4 recording software, Toontrack EZdrummer Lite, and the new Lexicon Pantheon II VST/AU reverb plug-in.Brilliantly designed, the Lexicon I'ONIX U42S sits where it makes the most sense, between your keyboard and monitor. Now all the level meters and gain controls are at your fingertips when using your DAW. Everything from the metal chassis to the electronics inside is meticulously crafted to ensure superior recordings that live up to Lexicon's standards of performance.Featuring newly designed dbx 60V high-voltage, ultra-low noise mic preamps on all 4 channels, the I'ONIX U42S is more than equipped to provide professional recordings that keep your music sounding its best. The preamps run on a high-voltage supply to guarantee stability and provide you with a superior recording across a wide dynamic range. Performance driven A/D – D/A converters ensure pristine 24-bit/96kHz audio to capture every subtle detail of your performance.The I'ONIX U42S can record four tracks at once and includes 4 combi-jack mic/line inputs with +48V phantom power, 2 TRS balanced line outputs, 2 hi-Z instrument inputs, 2 high power ¼" headphone outputs, S/PDIF and MIDI I/O. Dedicated knobs and meters offer easy access to input and output levels and locking combi-jacks make sure that a connection is not lost in the middle of a performance.The Lexicon name is synonymous with the world's best reverb. The Pantheon II VST/AU reverb plug-in offers 6 reverb types with 35 factory presets, which range from Vocal to Live Sound and Special Effects. Lexicon's exquisitely rich, full reverbs make it easy to complete your mix by adding depth and dimension to any track.

Buy NowGet 33% OFF

Click here for more information about Lexicon IONIX U42S 4-Input USB 2.0 Desktop Recording Studio

Read More...

Edirol FA-66 6 x 6 FireWire Audio Interface Review

Edirol FA-66 6 x 6 FireWire Audio Interface
Average Reviews:

(More customer reviews)
I've been using this product for about a year now and it has some real strengths in terms of audio fidelity and everything being in the one unit. I shared some of the difficulties of the last user initially, using a Dell Inspiron 8600, but was able to resolve them. The FA-66 can be resource fussy - not much extra needs to be going on with the computer before there is skipping. Maxing out the buffer fixes this, but this is devastating in terms of latency. The Windows that ships with Dells is less customisable than plain-vanilla Windows, and does have lots of things running in the background. I eventually identified that the anti-virus software was launching a separate app to check for updates (every 10 minutes!) and that this was causing skipping. Audio programs themselves - despite being resource intensive - don't seem to cause the problem. Once I disabled this app everything was good and I could operate at latencies of about 4ms without any problems.
There are a lot of good external units out there of which this is one. It really comes down to what you want and what software is packaged with the unit. 192KHz is overkill since consumer products like these have too much DAC jitter for this to be relevant. 96KHz is probably pushing it. But for straight-forward home or field recording where you don't want to bother with a mixer or a separate midi box, this is hard to look past. The inclusion of an analogue limiter sets it apart from offerings from M-Audio and the like, it is solidly built and having phantom power is very handy.
November 2007 Update - I've been using this with a MacBook Pro for a year now and its a dream. My recent purchase of Apple Logic Studio completes a really solid set up, exposing me to the harsh reality that any remaining limitations are user-based.

Click Here to see more reviews about: Edirol FA-66 6 x 6 FireWire Audio Interface

6 x 6 FireWire Audio Interface

Buy NowGet 37% OFF

Click here for more information about Edirol FA-66 6 x 6 FireWire Audio Interface

Read More...

7/06/2012

Neumann TLM-103 Microphone Review

Neumann TLM-103 Microphone
Average Reviews:

(More customer reviews)
If your looking for a pristine mic and require vocals that are clear and transparent, then this mic is worthy of your consideration. This mic has a wonderful clear and warm quality which can help make recording vocals a pleasure and can really help you shine.

Click Here to see more reviews about: Neumann TLM-103 Microphone

Ideal for all professional and semi-professional applications requiring high sound quality on a limited budget. The TLM-103 uses the transformerless circuitry found in numerous Neumann mics and a capsule derived from that used in the U87. Cardioid pattern, acoustically well-balanced, and provides extraordinary attenuation of signals from the rear. Frequency range: 20Hz-20kHz. Impedance: 50 ohms.ApplicationsDue to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios.Acoustic featuresThe TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67/U 87 microphones. The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost. The large wire mesh headgrille protects the capsule from explosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration.Electrical featuresWith just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM 103 is so reduced that even the smallest signals are reproduced basically noise-free. As it is capable of handling sound pressure levels up to 138 dB without distortion, the TLM 103 provides a dynamic range of 131 dB, according to DIN/IEC 651. The letters TLM stand for "transformerless microphone." With TLM technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.Operational safetyThe entire internal construction i

Buy NowGet 31% OFF

Click here for more information about Neumann TLM-103 Microphone

Read More...

Focusrite ISA One Classic Single-channel Mic Pre-Amplifier with Independent D.I. Review

Focusrite ISA One Classic Single-channel Mic Pre-Amplifier with Independent D.I.
Average Reviews:

(More customer reviews)
This preamp is cleanish warm and can be nice and warm when stacked on tracks...Its a pro preamp and never think its not, The DI is very handy and can actualy be used for stereo recording with the preamp and di input.(input another preamp out to DI input to the optional a-d out)outs are now stereo...
Two recordings at the same time is a big deal if you have the a-d card, it has 2 xlr outs or the a/d card stereo outs with preamp and another input....again these preamps are used on professional recordings the isa 110's which this is a single version....
This unit does not include the a-d digital card, they run around $399 but are pro quality as well, not at all like Focusrite's cheaper pres a/d or the Behringer's a-d mess....

Click Here to see more reviews about: Focusrite ISA One Classic Single-channel Mic Pre-Amplifier with Independent D.I.

Focusrite is dedicated to bringing you the tools you need to enhance the way you work. Our products are made with pride and principle by engineers who themselves are musicians and understand the part our products play in your process. The ‘ISA One' microphone pre-amplifier delivers Focusrite's prestigious ISA transformer-based pre-amp in a rugged and portable chassis, at a groundbreaking price. ISA One features the classic vintage microphone pre-amplifier topology from the original ISA110 module, including the Lundahl L1538 transformer and bespoke zobel network. The pre-amp is complemented by a line input and an independent D.I. channel, complete with dedicated gain control, active or passive impedance switch, a TRS Jack output for routing to an amp and an independent XLR output on the rear. This flexible independent D.I. makes the ISA One ideal both for engineers wishing to blend a D.I.'d guitar signal with a mic'd guitar cabinet, and for demanding performers who require a single classic solution for both guitar and vocals.ISA One also features an insert point, for extra processing between the pre amp or D.I. and the optional converter. Phantom power, phase reverse and a 75Hz, 18dB/octave high-pass filter are also available from the angled front fascia. Independent input metering for both channels is provided by a moving coil VU meter with variable calibration to suit analogue and digital recording media, alongside two six-LED peak meters; inputs can be metered either pre- or post-insert. The meter calibrations utilize all the same reference points as Digidesign's Pro Tools HD system, allowing effortless line-up. ISA One's headphone output features a dedicated volume control to deliver an external stereo cue mix fed to the headphones via two TRS jack inputs on the rear of the unit. At Focusrite our focus on quality is all-consuming. All of our products are easy to use, logically designed, and give years of class-leading, top-notch performance.

Buy NowGet 51% OFF

Click here for more information about Focusrite ISA One Classic Single-channel Mic Pre-Amplifier with Independent D.I.

Read More...

7/04/2012

Creative Professional E-MU 0404 USB 2.0 - Sound card - 24-bit - 192 kHz - 117 dB SNR - stereo - Hi-Speed USB Review

Creative Professional E-MU 0404 USB 2.0 - Sound card - 24-bit - 192 kHz - 117 dB SNR - stereo - Hi-Speed USB
Average Reviews:

(More customer reviews)
I need to point out that this is an *audio* interface first and foremost. Some of the other reviews only mention its MIDI capabilities. It is *also* a MIDI interface, but the primary purpose of this box is to facilitate the recording of audio. It has some great AD/DA converters to that end, along with the capabilities for very high sampling rates (unlike USB1 interfaces).
Another review also talked about using it as an external sound card. You certainly can do that, but it's a waste of money - other products exist that do the same thing better for cheaper, and without as much bulk or an external AC brick to deal with. No, if you're going to buy this box, buy it to record audio and/or MIDI.
If you're still confused as to why this thing exists, the bottom line is if you need it, you know it. This is a category of device designed for "advanced amateur" home recordists and musicians, who want to record their instruments and make their own demo tapes and need top quality and certain features that don't come stock in a standard PC sound card.
Now, as for this product vs. others in its category - I've only had it for a day, but so far, it does what it's supposed to. What you're really paying for are the DACs and the software, both of which are extremely important to home recording. The hardware other than the DACs is kind of cheap and flimsy, but it works. It's not going to stand up to abuse, though - it's all plastic, with gritty-feeling knobs and buttons and a thin plastic casing. One nice thing is having level displays on the box itself, which is something that some budget interfaces lack. Everything does work like it should.
A big question in audio interfaces is the actual interface itself between the box/card and your computer, which affects latency. I wanted something that I could use with any computer that I use, be it my laptop, my desktop, or a computer at my office. That ruled out PCI, which offers the best latency (but requires a breakout box if you want things like hardware level monitors), and it ruled out firewire too, because my laptop doesn't have the ports. I felt USB 2.0 was a decent compromise; it's not quite as good as firewire and definitely not as good as PCI, but it's a lot better than USB 1.1. If you can use PCI, though, Emu also offers a PCI version of this interface - just be aware that you'll be giving up a few features, plus the obvious portability. If you want USB 2.0 for the same reasons I did, this is honestly one of the few audio interfaces out there that can use it. (Most manufacturers assume you're either a pro, in which case you want firewire, or you're a total budget amateur, in which case you want USB 1.1.) There is definitely some latency when monitoring your recordings through the PC, but on the plus side the box does offer zero-latency hardware monitoring directly through the box.
The software bundle is pretty amazing for the price, and it's another big reason why I bought this model. It actually ships with at least three (by my count) full-fledged recording apps: CuBase LE, Ableton Live and Cakewalk LE. Don't let the "LE" designations scare you - they're totally feature-packed apps, just with fewer tracks and VST instruments than the full versions. Do you really need 96 recording tracks for a home recording? 24 should be enough. But the nice thing is these apps also give you an upgrade path to the full versions if you so desire, so you end up saving money vs. buying the full app by itself. This unit also comes with Amplitube LE, which is a plugin for Cubase that models a variety of guitar amps so you can really get that perfect sound that you're looking for - I've been having a ton of fun with this.
I give it four out of five stars only because of its questionable durability. This is not the interface you want if you plan to carry it around in a gig bag all over the place. Also, it does have an external power brick (a small one) - though that's what enables the phantom power for the mic inputs, so it's a good tradeoff. Still, if you want something really portable, look elsewhere (though you'll probably have to give up phantom power). But if you want a good all-around interface for not a lot of money, with a great software package and pro-level audio quality, and you plan to keep it on a desk most of the time, this unit is definitely worth a look.


Click Here to see more reviews about: Creative Professional E-MU 0404 USB 2.0 - Sound card - 24-bit - 192 kHz - 117 dB SNR - stereo - Hi-Speed USB

Emu 0404 USB 2.0 Audio/MIDI Interface delivers an unparalleled level of audio performance to your PC with premium 24-bit/192kHz A/D and D/A converters, pristine XTCTM mic/line/hi-Z preamps, ultra-low jitter clock and rock-solid stability. From its plug-and-play functionality and hands-on ergonomic design to professional features and signal-to-noise specs that are simply unmatched by any other USB interface on the market, the 0404 USB will forever change your expectations of USB audio. The 0404 USB also ships with the E-MU Production Tools Software Bundle that includes E-MU's Proteus VX, as well as software by Cakewalk, Steinberg, Ableton, IK Multimedia, and many more - everything you need to create, record, edit and master your music. Package Contents E-MU 0404 USB 2.0 AudioPod USB cable Universal power adaptor Quick Start installation guide E-MU Software/Manual CD-ROM Windows XP and x64 Drivers Owner's Manual and Tutorials E-MU Production Tools Software Bundle CD-ROM Cakewalk SONAR LE Steinberg Cubase LE Ableton Live Lite 4 for E-MU Steinberg Wavelab Lite IK Multimedia AmpliTube LE SFX Machine LT Minnetonka diskWelder BRONZE (trial) E-MU Proteus® VX (over 1000 sounds included) The Emu 0404 USB 2.0 Audio/MIDI Interface features Premium 24-bit/192kHz A/D and D/A converters (A/D: 113dB SNR, D/A: 117dB SNR) deliver unmatched USB audio fidelity E-MU XTC Class-A ultra-low noise Mic/Line/Hi-Z preamplifiers (-127dB EIN) with 48V phantom power and ground lift switches enable you to plug microphones, keyboards and guitars straight into your computer with professional results, while the built-in analog soft limiting circuit lets you record a hotter signal without fear of clipping Comprehensive digital I/O with optical and coaxial S/PDIF (switchable to AES/EBU) and MIDI In/Out to easily c

Buy Now

Click here for more information about Creative Professional E-MU 0404 USB 2.0 - Sound card - 24-bit - 192 kHz - 117 dB SNR - stereo - Hi-Speed USB

Read More...

Yamaha QY100 Music Sequencer Review

Yamaha QY100 Music Sequencer
Average Reviews:

(More customer reviews)
This is the best drum machine out there, because it's the only one I could find that allows you to substitute any yamaha keyboard sound for a drum. In other words, instead of the limit sounds you get from other drum machines (snares, kicks, symbols, and maybe bass), you get EVERY sound with this thing. So what you can do with this thing is take, for example, the kick on any preset drum loop this thing has, and replace that kick with a trumpet or guitar or strings. And obviously with such an awesome feature like that, it would be important to be able to set the "key" for those other instruments, which this thing does better than any other with its built-in miniature keyboard (look at the photos to see, it has a two octave keyboard of white and block keys) which you can use to "record" the key changes of your sequence. So you take, for example, a preset sequence/loop and you hit "record" and you begin to play along with the keys, and it records that as a song. You can then play back that song in any tempo, and it's like you got a whole band accompanying you. And more than this, this thing has a full-feature synth so you can edit every sound, make it dull, make it echo, add any effect, adjust the equalization of any sound, resonance, cut-off certain frequencies, etc. The only thing I wish this thing would do is light-up better in the dark. It can be hard to see in the dark. I had to use a book-reading light to see it in some live settings.

Click Here to see more reviews about: Yamaha QY100 Music Sequencer

If you're a guitarist, singer, or other instrumentalist who wants aneasy way to create great-sounding accompaniment for practice orperformance, the QY100 is for you! If you're an artist who needs aversatile song-writing tool for sequencing and music production, theQY100 is perfect for you, too! The QY100 is compact and battery-poweredso you can even pop it into your bag or backpack and create and playanywhere, anytime!The Amp Simulator – Inspiring sound for Guitarists and SingersLet's face it, great sound iswhat inspires performance and motivates you to practice. The QY100'sbuilt in Amp Simulator bring you the characteristics of a range ofamplifiers – specifically guitar amplifiers and microphone preamplifiers– so you have total control over your own sound as well as your backingaccompaniment. In addition to great amp sound, the QY100 Amp Simulatorincludes a range of top-quality effects for use with guitar andmicrophone. The guitar setups, for example, feature overdrive/distortion, modulation(chorus, flange, etc.) and reverb. The microphone setups offer delay,modulation and reverb. The QY100 has 18 guitar setups and 5 microphonesetups that you can customize to create the perfect sound for yourmusic.

Buy NowGet 13% OFF

Click here for more information about Yamaha QY100 Music Sequencer

Read More...

Fender Mustang III 100-watt open back combo amp w/ 1x12"?Celestion Speaker Review

Fender Mustang III 100-watt open back combo amp w/ 1x12Celestion Speaker
Average Reviews:

(More customer reviews)
Construction
This Amp certainly looks sharp. It is not nearly as heavy as I would expect a 100W amp to be, but seems well put together.
Controls
The III comes with a 2 button Foot Pedal which feels very solid and works perfectly. (You can expand to add an optional 4 button switch that Fender sells separately and also includes in the IV and V.)
On the amp, you have separate EQ knobs (Treble, Mids and Low) you have a gain, a volume, a Master Volume and a Reverb. Along with these, you also have an LCD screen that tells you which amp model you are using with witch pedals, presets, delays and reverbs. You also have separate buttons for changing Amp models, reverb, delays and modulation effects. The large knob on the top actually scrolls through presets, and once you press it, you can go into deep editing of the amp models, effects and presets.
The controls are intuitive and easy to use. It is a great mix of visual digital feedback as well as tactile knobs.
Comparing to other amps:
The Fender GDEC 3 does not have as much deep editing available on the amp itself. You need to use your computer to edit and download settings properly. But on the Mustang III, you do not feel that you are missing out on editing functionality by not keeping it plugged into a computer.
I don't know of another amp that has controls that are both as intuitive and as powerful.
The Sound (Most important)
Let me first compare this amp to what Line 6, Vox, and Peavy have offered in the past. All of the companies that have gone heavy into the amp modeling offer endless numbers of sounds and effects... BUT... How many of those sounds are useful for guitarists who are learning and trying to create sounds based on music that has inspired them? Line 6 offers tons of sounds... most of them are what I would call "niche" sounds that are only useful when recording a weird intro, or some crazy effects laden sound. What I find with Line 6 is that their vintage tones are very digital sounding and sound over processed. They don't sound overdriven, they just sound distorted. Also, Line 6 offers oodles of sounds for progressive rock, metal, and maybe even some weird jazz fusion. These sounds are unique and interesting, but the vast majority are of no use to someone like me who is learning to play the songs that I love and looking for useful rock, blues, and metal tones.
What I can say about the Mustang III is that the tones do not sound digital or overly processed. The Vintage amps have some great overdriven types of sounds. These are very passable sounds and fantastic models of the Real Thing. You can find the actual base amp models in memory banks 88-99. By playing these sounds you get a real feel of what you can do to the amps. A few of the sounds that are simply amazing to me are:
'57 Champ This amp model sounds so convincingly cool just like a little 8 inch Champ. Tons of character and tone. You can get some really cool vintage type blues sounds through this amp model. Think the Jimi Blues cd. The presets that use this amp that Fender created are all really fun and sound amazing.
Fender Bassman Wow! You can get some great bold rock sounds out of this amp model. It has the recognizable tone of the Bassman modeled really well. Big Bold bottom end with some singing highs.
'65 Deluxe is a fantastic all purpose amp model. Throw an overdrive pedal on there and play some great classic rock/blues. Or leave it alone for a beautiful clean tone.
The British Amps are all good models of Vox and Marshall type amps. They are all bold and in your face. Just play one ACDC riff into the 70's amp and you'll recognize the sound.
As far as the Vintage tones go...I dare you to find anything that models vintage tones this well anywhere. If you play rock, blues, Country, hard rock or Jazz, you have so many great choices. People who play in churches will love the variety of clean tones for your lighter stuff and good overdriven rock tones for faster paced songs.
What surprises me is that Fender has strongly marketed this amp for people who play heavy music. I was worried that the heavier amp models would not be nearly as good.
I was wrong. The 90's stack can get nice and grungy or crunchy as you like it. I'm pretty sure that this is a Mesa Boogie type of model. This is certainly your Metallica amp.
The 2000 metal is for all of your nu metal needs and can be pulled back a little to play some cool thrash sounds too.
The BIG bonus for heavy guitarists in my opinion though is the SuperSonic. This amp has a lot of great character and you can make it bluesy or really make it heavy and bold to play metal, thrash or whatever. If you overdrive it with a built in pedal, you can get some great raw and heavy tones out of this. I play some metal and hard rock as well as the classic and blues stuff that I like. I personally will play all of my heavy stuff on this SuperSonic amp.
The fact that you can take any of these basic amps and layer effects and pedals on them gives you absolutely infinite combinations of tones. You can have one guy who sets all 100 presets with vintage tones, and another guy who has all of the presets filled with metal and thrash. It is limitless.
I would, without a doubt choose this amp over ANY modeling amp out there for practice and fun.
I own a pimped out MIM Strat, and a off-the-rack Classic Vibe Strat and Tele as well as a Les Paul style guitar. They ALL sound very cool on this amp. The Classic Vibe 60's Strat really impresses me through this amp. So versatile with so many great sounds and such a high quality sound. I am really loving it!
This amp can play really really loud with it's 100 Watts, but you can also play it with great tone at very low volumes. (I have 4 kids and practice at night, and this amp is perfect.)
Fender Fuse and Ableton Software
I have to admit that I really don't feel a lot of need to dive too much deeper into sound editing than what I can do manually on the amp. However, You'll find amazing tones all over the Fender Fuse. The system is super easy to use and store on your amp. As with any open online forum, you will have to wade through tones that you don't love and aren't described well. But you will find some gems too.
I have not had time to dive into the ableton recording software yet, so I will have to save that review for later.
The FINAL WORD
I am a Father of 4 who needs an amp that sounds great at low volumes. I like Vintage tones as much as Heavy stuff, so I like a variety of tones. I hate overprocessed guitar tones. This amp is perfect for me. Perfect. The amp models are great, and the factory installed presets are a great variety of usable sounds. It comes with a built in tuner, tap tempo effects, a two button footswitch, an effects loop, a digital interface, deep editing computer software, a headphone jack, a usb port, recording software, and more
At $299 This amp costs less than effects pedals that friends of mine have purchased. I have a $300 strat that I love that sounds beautiful through it. After buying it, I have listed a Tube amp and several effects pedals that I have loved because I no longer will play it.
There is no better modeling amp for my needs!

Click Here to see more reviews about: Fender Mustang III 100-watt open back combo amp w/ 1x12"Celestion Speaker



Buy Now

Click here for more information about Fender Mustang III 100-watt open back combo amp w/ 1x12"Celestion Speaker

Read More...

7/03/2012

Blue Microphones Blueberry Cardioid Condenser Microphone Review

Blue Microphones Blueberry Cardioid Condenser Microphone
Average Reviews:

(More customer reviews)
You will not see a lot of advertising for the Latvian geniuses behind this wonderful little gem of a microphone, but one listen will convince you that you have discovered a pot of gold. It is at least as good as Neumann products costing half again the price: smooth, accurate, and from a company that is a delight to deal with. Try this blueberry. It sounds delicious.

Click Here to see more reviews about: Blue Microphones Blueberry Cardioid Condenser Microphone

The Blue Microphones Blueberry consists of a Class A discrete microphone amplifier perfectly matched to BLUE's single pattern, cardioid, hand built large diaphragm capsule. First and foremost, the Blueberry has been designed to provide the commanding, intimate presence associated with the world's best (and most expensive) vintage vocal microphones. With its shimmering, detailed highs, smooth midrange, and minimized proximity effect (a bass boost inherent in all unidirectional mics), the Blueberry excels at delivering a vocal right to the front of the mix where it belongs. When processed with limiting and/or compression, as is standard practice for most pop vocals, tracks recorded with the Blueberry will be free of pumping, low frequency thumps. Acoustic guitar, hand percussion, drums, and other critical high end sources also shine in front of the Blueberry, gaining an extra measure of presence that enables the most delicate sounds to cut through a mix, even at very low levels. Designed to fill the needs of the home musician and the professional alike, the Blueberry includes the Series Two Shockmount and comes handsomely packaged in its own cherrywood box. Whatever your music, add a Blueberry to the mix and let your ears feast on the sound. Review Guitar World (September 2003)Shocking Blues: Blue Microphones Dragonfly, Blueberry and Baby Bottle Capture the Heart of What's in Your Head With BLUE Microphones BLUE microphones are more than just a recording tool, they are an investment in value, quality, and expression. You will display them for their artistic beauty, covet and protect them for their investment value, and treasure them for conveying the heart and soul of any musical recording. BLUE stands for Baltic Latvian Univ

Buy Now

Click here for more information about Blue Microphones Blueberry Cardioid Condenser Microphone

Read More...

7/01/2012

Shure SM27-LC Cardioid Side-Address Condenser Microphone, includes Zipper Pouch and Stand Adapter Review

Shure SM27-LC Cardioid Side-Address Condenser Microphone, includes Zipper Pouch and Stand Adapter
Average Reviews:

(More customer reviews)
I bought this mic to record/amp my sax and other wood winds when I am on stage and in the studio. I liked this mic because it is built tougher than others which were meant for only studio work. I like a mic that can come with me on stage and still give me great sound. This mic has excellent noise rejection and allows me to move around as I play and still get good coverage. As a horn player it is hard get positioned around a mic this one lets you just stand naturally and it will pick you up. It is not super sensitive so when I recorded my flute, it sounds good, but it is pretty quite. Probably not great for a vocal condenser, but makes a great amp or instrument mic.

Click Here to see more reviews about: Shure SM27-LC Cardioid Side-Address Condenser Microphone, includes Zipper Pouch and Stand Adapter

Cardioid Side-Address Condenser Microphone, includes zipper pouch and stand adapter. The SM27 is a rugged and versatile large-diaphragm, side-address cardioid microphone, with low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. Durable Shure construction features three separate mesh layers that reduce wind and breath noise. Equally comfortable on stage or in the studio.
Uniform cardioid pattern for superior off axis rejection
Superior transient response from a low-mass large Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
Durable metal construction.
Three separate mesh layers reduces wind and breath noise.
15dB pad for performance consistency across a wider range of high SPL sources

Cartridge TypeExternally Biased Condenser

Frequency Response20 to 20,000 Hz



Directional Polar PatternCardioid

Output ImpedanceEIA Rated at 150 ohms (140 ohms actual)

Attenuation Switch0 or 15 dB attenuation

Low Frequency response switchFlat-6 db/octave below 115 Hz-18 dB/octave below 80 Hz

Phantom Power48 Vdc +/- 4 Vdc (IEC­268­15/DIN 45 596), positive pins 2 and 3

Current Drain5.4 mA typical at 48 Vdc

Common Mode Rejection>50 dB, 20 Hz to 20 kHz

PolarityPositive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3

Dimensions and Weight53.0 mm (2.08 in.) maximum body diameter156.2 mm (6.15 in.) long;642 grams (22.6 oz.)

Sensitivity (typical, at 1000 Hz; 1Pa = 94 dB SPL)-37 dBV/Pa

Self­noise (typical, equivalent SPL; A­weighted, IEC 651)9.5 dB

Maximum SPL (1000 Hz at 1% THD)2500 ohm load (Attenuator on): 138 (153) dB1000 ohm load (Attenuator off): 133 (148) dB

Output Clipping Level*2500 ohm load: 7 dBV1000 ohm load: 1 dBV

Dynamic Range2500 ohm load: 128 dB1000 ohm load: 123 dB

Signal to Noise ratio**84.5 dB

*20 Hz to 20 kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.**S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.


Buy NowGet 35% OFF

Click here for more information about Shure SM27-LC Cardioid Side-Address Condenser Microphone, includes Zipper Pouch and Stand Adapter

Read More...

6/30/2012

RODE NT1A Cardioid Condenser Microphone Review

RODE NT1A Cardioid Condenser Microphone
Average Reviews:

(More customer reviews)
If you are in to producing/engineering and want a super mean condensor mic without spending alot of cash, this is one to get; very cheap with an extremely expensive sound. It does not have any polar switches or any built in eq's, but most all DAW's do have eq's and phase reverse abilities. Plus, its better to cut freq's that are there, then to try and boost freq's that aren't there; the latter is impossible actually. I'm telling you, don't let the price tag throw you off; this baby makes everything sound good. I've used it on vocals, acoustic guitars, drums as an overhead/ride mic as well as a room mic for ambience. I also have a matched pair of NT 5's that are also absolutely amazing. Rode is a great Australian company that makes amazing mics with a 10 year warranty; yep...10 years. Get one, you won't be dissapointed. Remember though, bad acoustics = bad recording sound.

Click Here to see more reviews about: RODE NT1A Cardioid Condenser Microphone

The original NT1 was voted "Best Microphone at Any Price" by the editors of Electronic Musician magazine. The NT1A delivers performance usually associated with higher priced microphones. Features: large capsule (1") with gold-plated membrane; cardioid polar pattern; ultra low noise, transformerless circuitry; state of the art surface mount electronics; heavy-duty satin-nickel finish; internal shock mounting system; gold plated output connectors; true condenser (externally biased); full frequency response. The NT1A will blow you away! Ultra low-noise, transformerless circuitry.Cardioid polar pattern.Large capsule (1") with gold-plated membrane.Surface mount electronics.Heavy-duty satin-nickel finish.Internal shock mounting system.Gold plated output connectors.True condenser design (externally biased). WARRANTYAll RODE products are warrantied for 1 year from the date of purchase. Your purchase may be registered ?on-line? or by mailing the warranty card. The RODE Warranty covers parts and labour that may be required to repair the microphone during the warranty period.The Warranty excludes defects caused by normal wear, modification, shipping damage or failure to use the microphone as per RODE's Instruction Guide.

Buy NowGet 43% OFF

Click here for more information about RODE NT1A Cardioid Condenser Microphone

Read More...

6/29/2012

M-Audio Solaris Multipattern Condenser Microphone Review

M-Audio Solaris Multipattern Condenser Microphone
Average Reviews:

(More customer reviews)
Happy with product, only took about a week. It actually came with a shock mount which that wasn't list to come with it. Thanks

Click Here to see more reviews about: M-Audio Solaris Multipattern Condenser Microphone

The Solaris is a large-capsule condenser microphone that sounds as good as it looks. Beneath the stylish exterior lies the best-sounding solid-state electronics available at any price. Vintage design principles merge with incredibly tight manufacturing standards to yield no more than +/-1dB of deviation across the entire 20Hz-20kHz frequency range. The industry-thinnest evaporated gold diaphragm also delivers incredible sensitivity. Multi-pattern architecture provides flexibility that makes it ideal for just about any miking situation--included capturing vocals, guitar, piano, drums and live events. It's like having three mics in one.

Buy NowGet 20% OFF

Click here for more information about M-Audio Solaris Multipattern Condenser Microphone

Read More...

6/28/2012

M-Audio ProFire 2626 High-Definition 26-in/26-out FireWire Audio Interface with Octane Preamp Technology Review

M-Audio ProFire 2626 High-Definition 26-in/26-out FireWire Audio Interface with Octane Preamp Technology
Average Reviews:

(More customer reviews)
A few months ago, i decided to update my MOTU 828 mkii firewire interface with something that has better DAC converters, so i did some research and i decided to purchase the M-Audio Profire 2626.
When i plugged this unit in my studio and listened to it, i was taken by the clarity of the DACs, i also did some testing of the preamp mics, and they are clean sounding and uncolored.
So, I thought i had a great deal.. a 192/24 firewire 8x8 interface for around $500. Unfortunately, as i started using the unit more and more in my studio, i realized the many problems m-audio has been infamous for: bad drivers and unreliable software.
1-The biggest problem with the unit is that the latest ASIO M-Audio 2626 Windows XP drivers will blue screen some XP workstations when changing the audio resolution from 96k back to 48k or 44k in a DAW or some other program that uses the unit's driver. There is a thread in the M-Audio's forum about this, and quite a few people are experiencing this problem. As of January 10th 2010, the problem is still unresolved.
The funniest and saddest thing of all, is that when i use the free ASIO4ALL drivers with the Profire-2626, they do not crash Windows when switching audio resolutions. This should tell you how bad M-Audio drivers are.
2-The marketing literature for the M-Audio is basically incorrect and will lead you to believe the digital mixer offers true mixing flexibility (like MOTU's CueMix software) of all inputs and outputs.. which is FALSE. You can use the digital mixer's faders to control the analog inputs coming into the unit, ONLY if the inputs are connected to the preamps via XLR plugs.. if you use TRS 1/4" jacks to connect to inputs 3-8, the signal bypasses the mic preamps and cannot be controlled in the digital mixer. How stupid is that?
I had to go out and order 1/4" to XLR adapters to connect some of my synths to be able to control their input in the digital mixer
My older MOTU 828 mkii unit never had this inconvenience...
3-Want to use the 2626 inputs and outputs to send digital signals from your DAW to an analog box and back into your DAW?
Good Luck.. it took me a while to figure out how to do it (nevermind i used to do this in the MOTU 828 mkii all the time) and then i wasn't able to monitor the return signals without listening to the return signal mixed with the send signal!
Yep.. you can't monitor return signals without going through the mixer unless you are using the XLR inputs.. because if you use the TRS inputs you cannot control or mute the signal!!
2010-02 UPDATE
4-About 10 months ago, a user in the m-audio forums discovered that the Profire 610 and the Profire 2626 are not sample accurate when recording. What does this mean? it means if you want to record a band playing together, the tracks are going to be out of sync with each other, and you will need to synchronize them by hand in your DAW.
M-Audio confirmed this was a problem with their drivers, but after 10 months of waiting a fix hasn't been released yet.
All this problems with M-audio's unreliable and poorly written software have lead me to eventually replace this unit with something that offers better software and hardware quality, like the RME fireface 800.. the thing stopping me is the price.. the RME Fireface goes for about twice the price of the Profire 2626.. and for a good reason.
The experience with the profire 2626 has taught me a lesson: Don't buy another M-Audio product ever again.
But, don't just take my word for it.. point your browser to M-audio's profire forums and you will see all the problems users are having with this unit..


Click Here to see more reviews about: M-Audio ProFire 2626 High-Definition 26-in/26-out FireWire Audio Interface with Octane Preamp Technology

Building on a legacy of award-winning FireWire audio interfaces, the M-Audio ProFire 2626 brings next-generation performance to your PC or Mac host-based recording system. This powerful interface delivers 26 x 26 simultaneous I/O, complete with an onboard DSP mixer sourced from up to 52 audio streams. It features every kind of connection you needincluding award-winning Octane preamp technology on all eight analog inputs, ADAT, S/PDIF, word clock and MIDI. Critically acclaimed JetPLL jitter elimination technology ensures pristine audio quality and reliable synchronization all the way up to high-definition 24-bit/192kHz resolution. In addition, ProFire 2626 offers easy FireWire connectivity, extremely low latency, dual headphone outputs, front-panel instrument inputs and standalone operation. ProFire 2626 is compatible with most major audio software, including Pro Tools M-Powered.* * Compatible with Pro Tools M-Powered 7.4 with downloadable update. Please visit m-audio.com for update availability. 96kHz and 18 x 18 I/O maximum with Pro Tools M-Powered.

Buy Now

Click here for more information about M-Audio ProFire 2626 High-Definition 26-in/26-out FireWire Audio Interface with Octane Preamp Technology

Read More...